Savage manufactures a wide variety of assembly presses for a full spectrum of industrial products. Presses are available in C-Frame, 4 Post and Straightside construction to meet your requirements. Options include index tables and material handling equipment. Special custom built presses are also available to meet unusual requirements. Applications include assembling, crimping, bending, staking and riveting of parts as well as pressing bearings, seals or bushings into your product.

10 Ton C-Frame Assembly Presses

PT Cruiser Knuckle/Hub Assembly

C-Frame Assembly Presses

These presses press bearings into steering knuckles and hubs into the bearings for Chrysler Corp. (1998). These parts assembly presses feature load cells to measure force (during assembly) and encoders to measure stroke attained on each cycle with "part accept/reject" acknowledgement on each cycle. Graphical waveforms provide load vs. distance attained information. Since the product is safety related, a historical record is accumulated for each part. Similar parts assembly presses at Ford Motor Co. assemble pistons onto rack and pinion steering sectors. Other applications include staking of brackets onto seat belts and crimping of tie rod/ball studs for Dana Corp. and TRW.

More information about this product is available here in the form of a PDF document.

If you do not have a PDF reader, you can download one for free here:

Shuttle Table Press

Safe loading/unloading outside of the press. This slab side press features a part indexer. Press is used at GM Saturn Corp. to rivet the ring gear to yoke assembly.

More information about this product is available here in the form of a PDF document.

If you do not have a PDF reader, you can download one for free here:

150 Ton C-Frame Shuttle Press

C-Frame Assembly Press

Operation involves automatically pressing three bushings into large truck suspension system forgings. This press features twin shuttles to allow part placement and loading of one side while pressing opposite side.

More information about this product is available here in the form of a PDF document.

If you do not have a PDF reader, you can download one for free here:

Cold Header Die Repair Press

These presses are used in the boltmaking industry to press carbide inserts into and out of cold header dies. The presses are enclosed on all sides to withstand the occasional breakage of brittle carbide dies. The access door features a ballistics rated Lexan window.

More information about this product is available here in the form of a PDF document.

If you do not have a PDF reader, you can download one for free here:

Pulley Splitting

This Savage specialty machine splits steel disks to manufacture V-pulleys for the lawn and garden industries. The heavy duty design incorporates massive spindles and bearings on the form and cutter rolls which allows higher RPM. This faster cycling makes Savage the most productive splitter available. Computer controlled feeds and program storage for each part number.

More information about this product is available here in the form of a PDF document.

If you do not have a PDF reader, you can download one for free here:

Diecutting

Savage Moveable Head Diecutting Press has two (2) axes of motion. The guide head has positive depth control. A replaceable wear surface is provided on the bed. Slides are provided for mounting steel rule dies on the head. Also available: guided platen diecutters with manual or dual shuttle.